If you’re wondering what UDP port is used for IKE traffic from VPN clients to servers, wonder no more! We’ll tell you all about it in this blog post.
Checkout this video:
Introduction
The short answer is that IKE uses UDP port 500.
IKE stands for Internet Key Exchange, and is a component of the IPsec suite of protocols. IKE phase 1 establishes a secure channel between two hosts, and phase 2 establishes secure tunnels for data traffic.
In order to communicate, IKE uses UDP port 500. This is the default port for IKE traffic, and is used by most implementations.
IKE is a key component of VPNs, and is responsible for establishing and maintaining the secure tunnels that are used to carry data traffic. Without IKE, VPNs would not be possible.
The UDP Port Used for IKE Traffic from VPN Client to Server
The UDP port used for IKE traffic from VPN Client to Server is 500.
The IKE Protocol
The IKE Protocol is responsible for creating and maintaining the security association between the VPN client and server. IKE uses a number of UDP ports depending on the phase of operation.
Phase 1 uses UDP 500 for ISAKMP (Internet Security Association and Key Management Protocol). This is the port used to initially establish the security association.
Phase 2 uses UDP 4500 for NAT-T (Network Address Translation – Traversal). This is used to allow two hosts behind NAT devices to communicate with each other.
If you are using a VPN client that doesn’t support NAT-T then you will need to use UDP 500 again in phase 2.
The ISAKMP Protocol
The ISAKMP protocol uses UDP port 500.
The IKEv2 Protocol
The IKEv2 (Internet Key Exchange v2) protocol is a standard protocol used by VPN clients and servers to establish and maintain a security association (SA). IKEv2 uses UDP port 500 for IKE traffic from the VPN client to the VPN server.
Conclusion
In conclusion, the UDP port that is used for IKE traffic from a VPN client to server is 500. This port is needed in order to establish a secure connection between the two devices.